Specifications:

Power:

10 to 35 VDC (0 to 5 VDC or 4 to 20 mA Outputs)
15 to 40 VDC (0 to 10 VDC Output)
12 to 24 VAC (0 to 5 VDC Output)
15 to 28 VAC (0 to 10 VDC Output)

Note: If AC power is used, it must be shielded from
the signal wiring

Power Consumption:

22 mA max. DC (0 to 5 VDC or 4 to 20 mA Outputs)
6 mA max DC (0 to 10 VDC Output)
0.53 VA max. AC (0 to 5 VDC Output)
0.14 VA max. AC (0 to10 VDC Output)

Sensing Elements:

Temperature – Thermistor or RTD (See “Sensors” section for specs.)
Humidity – Capacitive Type, ±2% or ±3%RH @ 25°C (77°F), 20 to 80%RH

%RH Calibration Adjustment: ±5% POT

Wiring: 2 to 3 pair of 16 to 22 AWG*

Mounting: 2”x4” J-box or drywall mount – screws provided

Environmental Operation Range:

Temp: 32 to 122 oF (0 to 50 oC)

Humidity: 5 to 95%, non-condensing

Material & Rating: ABS Plastic , UL94 HB

Agency: RoHS and CE

BAPI recommends that you do not run wiring for the room
units in the same conduit as line voltage wiring or with
wiring used to supply highly inductive loads such as motors,
generators, and coils.